AUTONET TV

Taking the Heat (Heater Hose Maintenance/Repair)

If you have an internal combustion vehicle, you know it has a lot of hoses that carry various fluids.  And if you have a heater in your vehicle, you'll have heater hoses.

A heater hose connects to and from the engine so some coolant can be circulated through a little radiator called a heater core.  In cold weather, that heater core acts as a heat exchanger to heat up your cabin.

Even in the hot weather, the heater hoses can prove problematic.  That's because they may remain pressurized even though you're not running your heater.  Heater hoses are made out of tough materials since they must handle heat and pressure.  But even the durable rubber, plastic and metal they are made out of can crack or leak from years of use.  That means coolant can be sprayed out into the engine compartment or leak onto a driveway or garage floor. 

You may be able to see a puddle of coolant under your vehicle or perhaps smell the odor of the coolant under the hood.  Some say it has a sweet smell.  Another sign coolant may be leaking out of the heater hoses is your engine may be running hotter.   You'll be able to tell by watching the heat gauge on your dash.  Let's say your heat gauge usually points just slightly below halfway between the C and H (Cold and Hot) of the heat gauge.  But now it is just slightly above.  That's enough to tell you that the coolant temperature has gone up a little, a possible sign of trouble.

This is a good time to swing by your service facility and have them take a look. If they catch the leak when it's small, it's a relatively simple matter of draining the coolant, replacing the hoses and replacing the coolant.  Sometimes, though, a heater hose can suddenly burst and a lot of coolant can leak out quickly.  That can, in turn, cause your engine to start to overheat.  In that case, you may see your vehicle's temperature gauge shoot up pretty quickly.  Then it's best to pull over and have your car towed to a repair facility since driving with no coolant can cause severe engine damage.

Preventative maintenance is your best insurance against heater hose problems.  A technician will periodically check for any signs of cracks or leaks.  You should expect to replace a heater hose at least once during the time you own your vehicle.

American Brake Centers Inc.
3435 Bashford Ave Ct.
Louisville, KY 40218
502-459-0355
http://www.americanbrakecenters.biz

The Right Stuff (Choosing Replacement Parts)

Let's face it.  Vehicles are complicated machines, each having thousands of parts.  And since they're subjected to heat, cold, vibrations, bumps and much more, these parts wear out and need to be replaced. 

When your service advisor says you need a new part, you may have many options.  Let's say you need a new muffler.  One choice would be to get exactly the same part that was installed when the vehicle was manufactured.  The advantages are that it will perform the same way as the one it's replacing and will likely last about the same amount of time as the original.

Some mufflers are made by the same companies that supplied the automaker when your vehicle was new (they call that an OEM part—Original Equipment Manufacturer).  And often those are the same as the part you'd buy from a dealer. A reputable vehicle service facility will know which ones these are because they replace mufflers all the time and do their homework.

The good news is there are many different mufflers available from several manufacturers.  These are called aftermarket parts. Some of them may use different metals or a different construction technique. Some may sound a little sportier while some may make your engine perform better.  Your service advisor will discuss what your driving habits are and help choose the part that's best for you.

You may be able to get a part that's better than the one originally installed.  Here's an example.  A repair shop discovered one owner's vehicle had developed cracks and leaks in the hoses that attach to the heater core.  They were made of plastic, and heat and pressure had caused the originals to crack.  The service advisor recommended they replace it with an aftermarket part that was made of aluminum instead, one that was more durable than the original part.

Some aftermarket parts cost more, some cost about the same or less.  Depending on how and where you drive and what you want out of your vehicle, you can decide to buy more economical parts which might be the best fit for your needs.  Or you may decide to upgrade to a better, more expensive part.

American Brake Centers Inc.
3435 Bashford Ave Ct.
Louisville, KY 40218
502-459-0355
http://www.americanbrakecenters.biz

Put the Brakes On! (Brake Caliper Replacement)

Keeping your vehicle's brakes in top shape is one of the most important things you can do for your safety and those on the road with you. Most drivers know a little about brake pads and rotors but maybe not so much about another brake component called the calipers.

Disc brakes work by a mechanical system that presses your brake pads against discs called rotors (you can usually see these discs through your wheels). The friction stops your vehicle smoothly when everything is working the way it should.  The calipers use the hydraulic pressure of the brake fluid to apply the stopping power. 

After they've been on your vehicle for a while, the calipers can get stuck or wear out.  If calipers on one side of the vehicle work correctly and not on the other, you might feel a pull in one direction.  You might feel the same kind of pull if the caliper is stuck and is applying constant pressure.  You might hear scraping or squealing coming from a stuck caliper and you might smell burning on that side.  The friction from a caliper that's always applying pressure may cause that wheel to heat up, so after you've pulled your vehicle off the road safely, the wheel with the stuck caliper will might feel hotter than the others

Because there are many different components to the brakes, it's best to leave the diagnosis and repair to a trained technician. They will run each wheel through a series of tests and inspections that can pinpoint the problem.  Sometimes it involves more components than just the caliper that may need changing at the same time.

The best way to make sure your brakes will perform well is to is to have our service center perform regular inspections and follow the vehicle manufacturer's recommended service.  That way your brakes will be ready, willing and able when you call on them to put a stop to things.

American Brake Centers Inc.
3435 Bashford Ave Ct.
Louisville, KY 40218
502-459-0355
http://www.americanbrakecenters.biz

Round and Round (Wheel Balancing)

In a perfect world, all wheels and tires would be perfectly round and weigh exactly the same at every point of the wheel.  Unfortunately, they're not, and if they're out of balance, they can reduce the lifespan of your tires, make your vehicle shake like a carnival ride, and maybe even damage a few suspension parts along the way.  You don't want that!

Wheel balancing, sometimes known as tire balancing, is a process by which a technician makes sure your tire/wheel assembly has evenly distributed weight.  If it isn't, it can give your ride bad vibrations.  If you feel your vehicle's steering wheel shaking, it can mean unbalanced wheels in the front. If you can feel a vibration in your seats, it could be unbalanced rear wheels.

In addition to your vehicle vibrating at higher speeds, there are other signs that your wheels are out of balance. You may see uneven tread wear, or you may notice you aren't getting the kind of fuel economy you used to. 

When you experience these problems, bring your vehicle in, and we can put your wheels on a machine designed to detect any imbalance.  The technician will start your wheels spinning, and a computer will determine how much weight is needed where.  Then, the technician can add small weights on the inside or outside of your wheel rim to precisely balance out the uneven weight.  When the wheel is balanced correctly, it will spin evenly and smoothly.

Sometimes your vehicle will hit a pothole or object in the road that dislodges one of those weights, which can throw that wheel out of balance again.  If so, you'll have to bring it in to have that corrected

Some drivers confuse wheel balancing with wheel alignment. Alignment is making sure the wheels are perpendicular to the road and parallel with each other.  Sometimes your vehicle will need both balancing and alignment done at the same time.

No vibrations are good vibrations when it comes to your wheels.  Bring your vehicle to us, and we'll perform a balancing act to keep your vehicle riding smoothly down the road.

American Brake Centers Inc.
3435 Bashford Ave Ct.
Louisville, KY 40218
502-459-0355
http://www.americanbrakecenters.biz

Don't Neglect Your Spare (Spare Tire Care)

If you've ever had a flat tire, then you know welcome it is to have a spare tire that is properly inflated, in good shape and easy to get to.  Problem is many of us don't even give our spare tire (if we even have one) a second thought.

If you have an SUV or truck with a spare, it may be mounted outside the vehicle, such as on the tailgate or underneath the vehicle.  All of them, especially those underneath, take the brunt of debris, moisture, salt and dirt from the road surface, a potpourri of corrosion potential.  The hardware that holds these on can rust into a solid mess, making it hard for you or even a roadside assistance service to get off. 

If you have one of those, have it checked and maintained at your vehicle repair facility on a regular basis.  They should be lubricated and cleaned periodically, and some recommend doing this service every time you have your tires rotated.  If the spare is the same size as the tires on the vehicle, it may be a good idea to have it rotated with the others. 

Some vehicles have compact spares that are in a small well in the trunk or some other spot. Most drivers don't pay any attention to them.  Over time, air leaks out of those spares, leaving them flat when you most need them.  When you have your vehicle in for service or routine maintenance, ask your service advisor for his or her advice on making sure the spare is inflated properly and cleaned, usually at least twice a year.

You may not know it, but your vehicle may not have any spare at all.  Instead, it may have an inflator kit that you are supposed to use to inflate and seal a flat tire.  That sealant has a limited life span and should be replaced every few years.  Check with your service advisor to make sure the kit is up to date and will do the job when called upon.

Manufacturers know a flat tire's always a possibility.  No matter what contingency solution they've included with your vehicle, keep it in shape and in good working order.  When you need it, you'll be very glad you did.

American Brake Centers Inc.
3435 Bashford Ave Ct.
Louisville, KY 40218
502-459-0355
http://www.americanbrakecenters.biz